神马作文网英语翻译Characteristic Unity of measure Dates TechnicalResistanc
来源：学生作业帮 编辑：神马作文网作业帮 分类：英语作业 时间：2024/11/11 04:17:02
英语翻译
Characteristic Unity of measure Dates Technical
Resistance to traction Rm min (*1) N/mm² (Mpa) ………………….
Hardness Brinnel (HBS) (*1) HBS ………………….
Proof strength,non – proportional extensions Rp0.2 ………………….
Rp0.2 mins (*1) N/mm² ………………….
Structures prevailing (ferrite,pearlite,other) (*1) :
………………………………………………………………………………………………………
Extension - A min (*1) % ………………….
Resistance to the cut N/mm² ………………….
Resistance to the torsion N/mm² ………………….
Form of elasticity is (to traction and compression) GN/m² ………………….
Coefficient of Poisson v
Limit of work (Wohler) (to rotating bending),without carving (diameter 10,6
mms) N/mm² …………………
Limit of work (Wohler) (to rotating bending),with carving (diameter 10,6 mms)
N/mm² ……………….Resistance to compression N/mm² ……………….
Toughness to the fracture Kic Mpa x Vm ……………….
Thermal conductivity to 300°C W/(Ks x m) ……………….
Specific heat between 20 °Cs and 500 °Cs J/(kg x K) ……………….
Coefficient of linear expansion between 20°C and 400°C µm/(ms x K) ……………….
Mass volume Kg/dm³ ……………….
Permeability maximum µH/m ……………….
Losses for hysteresis (B=1T) J/m³ ……………….
Resistivity µ x m ……………….
N° Attached:____________
Characteristic Unity of measure Dates Technical
Resistance to traction Rm min (*1) N/mm² (Mpa) ………………….
Hardness Brinnel (HBS) (*1) HBS ………………….
Proof strength,non – proportional extensions Rp0.2 ………………….
Rp0.2 mins (*1) N/mm² ………………….
Structures prevailing (ferrite,pearlite,other) (*1) :
………………………………………………………………………………………………………
Extension - A min (*1) % ………………….
Resistance to the cut N/mm² ………………….
Resistance to the torsion N/mm² ………………….
Form of elasticity is (to traction and compression) GN/m² ………………….
Coefficient of Poisson v
Limit of work (Wohler) (to rotating bending),without carving (diameter 10,6
mms) N/mm² …………………
Limit of work (Wohler) (to rotating bending),with carving (diameter 10,6 mms)
N/mm² ……………….Resistance to compression N/mm² ……………….
Toughness to the fracture Kic Mpa x Vm ……………….
Thermal conductivity to 300°C W/(Ks x m) ……………….
Specific heat between 20 °Cs and 500 °Cs J/(kg x K) ……………….
Coefficient of linear expansion between 20°C and 400°C µm/(ms x K) ……………….
Mass volume Kg/dm³ ……………….
Permeability maximum µH/m ……………….
Losses for hysteresis (B=1T) J/m³ ……………….
Resistivity µ x m ……………….
N° Attached:____________
技术测量的特征单位
原材料抗拉应力,最小值（注1）牛顿/平方毫米(兆帕斯卡）;
布氏硬度（HBS),HBS
试验强度,非比例（均匀）延伸；Rp 0.2
Rp0.2 最小值；
结构主要金相状态（铁素体,珠光体,其它）；
延伸率,A 最小%；
抗剪应力；
抗扭应力；
弹性型式（拉伸,压缩）千兆牛顿/平方米；
泊桑系数v；
极限功（胡勒）（对旋转弯曲）无破口（直径10.6 mm2);
极限功（胡勒）（对旋转弯曲）有破口（直径10.6mm2);
抗压应力；
冲击断裂韧性；
至300度时的导热系数；
比热,20 度至500度之间(焦尔/公斤-绝对温度）；
线性膨胀系数,20 --400度间（微米/（毫秒-绝对温度）；
质量体积,公斤/立方分米；
热导性,最大（微焓/米）,
热滞损失,（焦耳/平方米；
耐热抗力,
附注号----
原材料抗拉应力,最小值（注1）牛顿/平方毫米(兆帕斯卡）;
布氏硬度（HBS),HBS
试验强度,非比例（均匀）延伸；Rp 0.2
Rp0.2 最小值；
结构主要金相状态（铁素体,珠光体,其它）；
延伸率,A 最小%；
抗剪应力；
抗扭应力；
弹性型式（拉伸,压缩）千兆牛顿/平方米；
泊桑系数v；
极限功（胡勒）（对旋转弯曲）无破口（直径10.6 mm2);
极限功（胡勒）（对旋转弯曲）有破口（直径10.6mm2);
抗压应力；
冲击断裂韧性；
至300度时的导热系数；
比热,20 度至500度之间(焦尔/公斤-绝对温度）；
线性膨胀系数,20 --400度间（微米/（毫秒-绝对温度）；
质量体积,公斤/立方分米；
热导性,最大（微焓/米）,
热滞损失,（焦耳/平方米；
耐热抗力,
附注号----
英语翻译Characteristic Unity of measure Dates TechnicalResistanc
英语翻译To appreciate the uniqueness and unity of psychology,you
unity of command是什么意思
dates of employment是什么意思
dates of attendance是什么意思
英语翻译A characteristic of American culture that has become alm
英语翻译The unique characteristic of store retailing implies tha
英语翻译Perhaps no characteristic of meat and meat products,with
英语翻译The characteristic physical properties of a substance ar
英语翻译anomalous mole fraction effect characteristic of vertebr
英语翻译characteristic countries
英语翻译Point of Measure Method of Measuring Front Body Length (