谁能救救我啊~~~~~~我老板故意刁难我 要我翻译~~~求英语高手

谁能救救我啊~~~~~~我老板故意刁难我 要我翻译~~~求英语高手
Below are general guidelines for how to use Dynamic Descaler® on the following types of equipment:
- Air compressors
- Cooling towers and closed circuit cooling
- Heat exchangers
- Vacuum pumps
- Specific application may differ depending on the specific equipment, layout, and other factors. Call us if you have any questions on how to most effectively use Dynamic - Descaler® on your equipment.
Air Compressors
A reciprocating air compressor is normally a heavy-duty, continuous service compressor. Cylinder construction usually incorporates a water jacketed cylinder and water jacketed heads to remove some of the heat of compression and also to improve the lubrication and reduce carbonization of valve parts. Water jacketing around valve and packing is essential, since these are points of localized heating.
As time goes on, you will have lime, water scale and rust accumulation inside the water jackets, which in time, will overheat the air compressor. This will also occur in the intercooler and aftercooler. With Dynamic Descaler® lime, water scale, rust remover you can clean these vital parts, without disassembling the cylinders, aftercooler, and the intercooler. Just simply remove the water in/out connection from each part and circulate Dynamic Descaler® for the recommended amount of time. After the circulation, flush with water and connect the water in/out connections back to the proper location.
我明天就要交~纠结死我了~

以下是一般的准则如何使用动态类型的设备对下列除垢剂®：
-空气压缩机-冷却塔和闭路冷却-热交换器-真空泵-特定应用程序可能会有所不同,取决于具体的设备,布局,以及其他因素.给我们打电话,如果您有任何疑问,空气压缩机就如何最-除垢剂®上有效地使用动态您的设备.往复式空气压缩机通常是重型,持续的服务压缩机.气缸建筑通常采用水夹套,水夹套气缸头,消除了热压缩部分,也是改善润滑,降低阀门零件碳化.水夹套阀周围及包装是必要的,因为这些供热站的本地化.随着时间的推移,你将有石灰,水和空气压缩机规模锈水套内部积累,这在当时,将过热的.这也将出现在中间冷却器和后冷却器.
随着动态除垢剂®石灰,水垢,除锈你可以清除这些重要部件,无需拆卸气瓶,后冷却器和中冷.只需简单地删除/输出连接各部分并分发给了时间的建议量动态除垢剂®的水.流通后,用清水冲洗并连接输入/输出连接返回到正确位置的水.