英语翻译测量硅钢片(silicon steel sheets)的毛刺(burr)高度,用专用测量尺或千分尺(microm
来源:学生作业帮 编辑:神马作文网作业帮 分类:英语作业 时间:2024/09/23 19:30:16
英语翻译
测量硅钢片(silicon steel sheets)的毛刺(burr)高度,用专用测量尺或千分尺(micrometer)测量.
测量方法:
在硅钢片纵向1~2m内两边各取3点每点先将千分尺伸进片内测量基础厚度,再将千分尺移至边缘测量毛刺高度,均以手捻千分尺尾部一响为准.边缘尺寸减去基础尺寸为毛刺高度,最大值不应超过0.025mm.
测量硅钢片(silicon steel sheets)的毛刺(burr)高度,用专用测量尺或千分尺(micrometer)测量.
测量方法:
在硅钢片纵向1~2m内两边各取3点每点先将千分尺伸进片内测量基础厚度,再将千分尺移至边缘测量毛刺高度,均以手捻千分尺尾部一响为准.边缘尺寸减去基础尺寸为毛刺高度,最大值不应超过0.025mm.
Measuring the height of burr of Silicon steel sheets,
Measuring tool: Special measuring ruler or micrometer
Measuring method: take 3 measuring points in a range of 1 to 2 meters from either edge of the vertical side of a silicon steel sheet, measuring the basic thickness of the sheet by putting the micrometer in the sheet. Then, move the micro to the edge of the sheet and measuring the thickness of the edge. Read to micrometer after the first click in both cases.
The result got from the measure of the edge thickness minus the measure of the basic thickness shall be the height of the burr. The maximum of the result shall not be bigger than 0.025mm.
供参考.
Measuring tool: Special measuring ruler or micrometer
Measuring method: take 3 measuring points in a range of 1 to 2 meters from either edge of the vertical side of a silicon steel sheet, measuring the basic thickness of the sheet by putting the micrometer in the sheet. Then, move the micro to the edge of the sheet and measuring the thickness of the edge. Read to micrometer after the first click in both cases.
The result got from the measure of the edge thickness minus the measure of the basic thickness shall be the height of the burr. The maximum of the result shall not be bigger than 0.025mm.
供参考.
为什么圆柱体的高度要用游标卡尺测量,而直径要用千分尺测量
为什么圆柱体的高度要用游标卡尺测量,而直径用千分尺测量
千分尺尺的测量精度是多少?
大家是怎样用千分尺测量的
米尺,游标卡尺,千分尺测量的不同
测量出多组数据和平均值怎样算误差(用千分尺测长度)?
外径千分尺如何测量
用游标卡尺和千分尺测量尺寸误差,分析误差环节对于测量结果的影响
用千分尺测量5次,测量结果不同,如何读数
量具每年都要检定吗1、通俗点解释检定、外较、内较?2、我公司用的测量设备量具有千分尺、高度尺、卡尺、三坐标是否可以找公司
英语翻译冲毛刺测量仪punch burr measuring instrument刻度线间距scale- line-di
测量旗杆的高度