神马作文网英语翻译To polish use XPAL,Alox 721 or comparable material.Polis
来源：学生作业帮 编辑：神马作文网作业帮 分类：英语作业 时间：2024/11/11 12:12:06
英语翻译
To polish use XPAL,Alox 721 or comparable material.Polishing should require a maximum of 20 seconds under the above machining conditions.
Hydration:
Lens made with G-Materials will hydrate much faster than lenses made from other materials of comparable water content.Place lenses into the Borate Buffer pH 7.2 isotonic saline and allow the lens to sit in solution while stirring for a minimum of 6 hours.Hydrate for the minimum time specified at constant temperature (T = 20± 2°C).A minimum of 10 ml per lens should be used for hydration.
After hydration,lenses should be rinsed,autoclaved,and store in the pH 7.2 buffered saline solution for packaging and sterilization.
Isotonic Saline:
Borate Buffer
pH 7.2; 295 mOs
NaCl 8.01 grams
H3BO3 2.47 grams
Na2B4O7 .10H2O 0.14 grams
The weights for the buffered saline formulas are based on a 1 Liter Volume solution.The borate solution shows excellent performance through the sterilization process (autoclaving) and leaves the lenses free of residue.
To polish use XPAL,Alox 721 or comparable material.Polishing should require a maximum of 20 seconds under the above machining conditions.
Hydration:
Lens made with G-Materials will hydrate much faster than lenses made from other materials of comparable water content.Place lenses into the Borate Buffer pH 7.2 isotonic saline and allow the lens to sit in solution while stirring for a minimum of 6 hours.Hydrate for the minimum time specified at constant temperature (T = 20± 2°C).A minimum of 10 ml per lens should be used for hydration.
After hydration,lenses should be rinsed,autoclaved,and store in the pH 7.2 buffered saline solution for packaging and sterilization.
Isotonic Saline:
Borate Buffer
pH 7.2; 295 mOs
NaCl 8.01 grams
H3BO3 2.47 grams
Na2B4O7 .10H2O 0.14 grams
The weights for the buffered saline formulas are based on a 1 Liter Volume solution.The borate solution shows excellent performance through the sterilization process (autoclaving) and leaves the lenses free of residue.
以波兰语使用xpal ,721的AlOx或可比材料.抛光应要求最多20秒,根据上述加工条件.
水化：
镜头作出了G型材料将水合物的速度远远超过镜片制成的其他材料可比的水含量.地方隐形眼镜纳入硼酸缓冲pH值7.2生理盐水,并让镜头坐在解决方案,而搅拌至少应为6个小时.水合物最起码的指定时间在恒定温度（ T = 20 ± 2 ℃ ） .最低的10毫升每镜头应该用于水化.
水化后,镜片应漂洗,蒸压,并储存在pH值7.2的缓冲盐溶液为包装和灭菌.
生理盐水：
硼酸缓冲
pH值7.2 295马鞍山
氯化钠8.01克
硼酸2.47克
硼砂.10H2O的0.14克
度量衡为缓冲液配方,是基于对1升容积的解决办法.该硼酸溶液具有优良的性能,通过灭菌过程（压） ,叶隐形眼镜免费的残留物.
阿拉伯文到英语朝鲜语到英语德语到法语德语到英语俄语到英语法语到德语法语到英语荷兰语到英语葡萄牙语到英语日语到英语西班牙语到英语希腊语到英语意大利语到英语英语到阿拉伯文英语到朝鲜语英语到德语英语到俄语英语到法语英语到荷兰语英语到葡萄牙语英语到日语英语到西班牙语英语到希腊语英语到意大利语英语到中文(繁体)英语到中文(简体)中文到英语中文(繁体到简体)中文(简体到繁体)
水化：
镜头作出了G型材料将水合物的速度远远超过镜片制成的其他材料可比的水含量.地方隐形眼镜纳入硼酸缓冲pH值7.2生理盐水,并让镜头坐在解决方案,而搅拌至少应为6个小时.水合物最起码的指定时间在恒定温度（ T = 20 ± 2 ℃ ） .最低的10毫升每镜头应该用于水化.
水化后,镜片应漂洗,蒸压,并储存在pH值7.2的缓冲盐溶液为包装和灭菌.
生理盐水：
硼酸缓冲
pH值7.2 295马鞍山
氯化钠8.01克
硼酸2.47克
硼砂.10H2O的0.14克
度量衡为缓冲液配方,是基于对1升容积的解决办法.该硼酸溶液具有优良的性能,通过灭菌过程（压） ,叶隐形眼镜免费的残留物.
阿拉伯文到英语朝鲜语到英语德语到法语德语到英语俄语到英语法语到德语法语到英语荷兰语到英语葡萄牙语到英语日语到英语西班牙语到英语希腊语到英语意大利语到英语英语到阿拉伯文英语到朝鲜语英语到德语英语到俄语英语到法语英语到荷兰语英语到葡萄牙语英语到日语英语到西班牙语英语到希腊语英语到意大利语英语到中文(繁体)英语到中文(简体)中文到英语中文(繁体到简体)中文(简体到繁体)
英语翻译Material or equipment offered to meet the requirements o
英语翻译This material is sold for in vitro use or research purpo
英语翻译翻译一下这几个短语,be comparable to be comparable with
英语翻译Due to its design or material composition,a product pack
英语翻译Material or semi-finished component(s) provided to a man
英语翻译Don't use words,expression or phrases_____only to people
英语翻译He needs some time to polish his paper.
什么时候用comparable with什么时候用comparable to
英语翻译I am not aware of any material fact or material change w
英语翻译Backfill with selected fill or granular material involvi
英语翻译The representations and/or material omissions included,b
英语翻译The specific material selected for a particular dies or